Return to Service Department Rask Cycle 724-538-4123

HARLEY AND BRITISH MOTORCYCLE
BOTTOM END   OVERHAUL
*Prices quoted are if top end and transmission are removed.
THIS IS AN ESTIMATED PRICE ONLY

PLEASE NOTE
The prices quoted are NOT by any means firm.  It is impossible to quote prices on 30-40 year old engines with any kind of accuracy.
 The prices quoted are for "best case" scenario and represent what would be considered "bottom line, could not possibly be any cheaper price!!"

This is seldom the case and you should NOT expect your rebuild to cost exactly the price shown.  Most engines will have more problems than what are listed and as a result will cost more to rebuild.

NEED YOUR MOTOR OR TRANSMISSION DONE RIGHT, BUT LIVE TOO FAR TO DRIVE?  SEND IT TO US WE'LL FIX IT RIGHT. 
FOR MORE DETAILS CALL 724-538-4123 (ASK FOR GARY)  OR EMAIL
 
TRIUMPH 500/650/750 TWIN
$800.00
PRICE INCLUDES: :
Remove crank and bearings from crankcases. Clean and inspect all parts. Remove sump plug and trap. Clean sump trap. Replace rod and main bearings.  Reassemble crankshaft and remaining parts. (includes: bearings, labor) *Any other parts needed are extra charge.
 

BSA TWIN
$950.00

PRICE INCLUDES:
Split crankcases. Remove crank and bearings. Clean and inspect all parts. remove sump plug and clean sump. Replace rod and main bearings, rod bolts. Size right main. reassemble crankshaft and engine cases, set crankshaft end play (includes: rod bearings, rod bolt, main bearing, main bushing, labor) *all other parts needed are extra charge.
 
HARLEY BIG TWIN
(Pan, Knuckle, Shovel, EVO)

$999.00
PRICE INCLUDES:
Split crankcases, dismantle, clean and inspect all parts. Replace rod bearings, main bearings, rods, crank pin, true flywheels, reassemble, cases. Set end-play. Set cam and gear timing. Line hone as needed (includes: rod bearings, main bearings, rod and crankpin, labor) *All other parts needed are extra charge.
 
HARLEY IRONHEAD, EVO, XL
$1000.00

PRICE INCLUDES:
Split crankcases, dismantle, clean and inspect all parts. replace rod bearings, main bearings, rods, crank pin, true flywheels, reassemble cases. Set end-play. Set cam and gear timing. Line hone as needed.

(Includes: rod bearings, main-bearings, rods and crankpin, labor)

*All other parts needed are extra charge.

 
PRICES ARE SUBJECT TO CHANGE AT ANY TIME

 

Last Updated:02/26/16
copyright Rask Cycle